Only One Video Stream on Dual Gimbal Drone on Android

To achieve improved performance on Android devices, the DroneSense Mobile app will only stream the currently visible feed from the flight control app into Ops Hub. The pilot's experience will not be affected.

NOTE: This change is for Android devices only. iOS/iPadOS devices are unaffected by this change.

With this setup, the only video that will be visible to remote viewers in Ops Hub is the camera that is in the PRIMARY view for the pilot.

Here's an example of how this works:

• M210 flying with a Z30 in main view and XT2 in the mini video window. In this case, the Z30 will be streaming, and the XT2 will show as disconnected.
• If the pilot switches to the XT2 as the main view and Z30 in the mini window, then XT2 will come online and start streaming, and the Z30 will change to show as disconnected.
• If the pilot sets the map as the main view with either camera in mini window, then the camera in the mini window will be streaming, and the other camera will show as disconnected.