DroneSense currently supports the following drones from DJI:
Model | Android | iOS |
Mavic Pro & Mavic Platinum Pro |
![]() |
![]() |
Mavic 2 Series (Pro, Zoom, Enterprise, Enterprise Dual) |
![]() |
![]() |
Mavic 2 Enterprise Advanced |
![]() |
![]() |
Mavic 3 Enterprise (3E and 3T) |
![]() |
![]() |
Matrice M200 and M200 v2 Series |
![]() |
![]() |
Matrice M300 RTK |
![]() |
![]() |
Matrice M30/M30T |
![]() |
![]() |
Matrice M600 |
![]() |
![]() |
Phantom 4 Series |
![]() |
![]() |
Mavic Air 1, Air2, and Air 2S |
![]() |
![]() |
Mavic Mini 1, Mini 2, and Mini SE |
![]() |
![]() |
The following DJI models are currently unsupported pending an SDK update from DJI. No ETA for this update is currently available:
- FPV
- Avata
Supported DJI Sensors
Click here to view the currently supported detachable sensors for the M300 RTK and M200/210 Series drones.
DroneSense also supports the following non-DJI drones:
Manufacturer | Model | Android | iOS |
Autel | EVO II (v1 & v2) | ![]() |
![]() |
Autel | EVO II Pro (v1 & v2) | ![]() |
![]() |
Autel | EVO II Dual (v1 & v2) | ![]() |
![]() |
Autel | EVO II Dual 640T (v1 & v2) | ![]() |
![]() |
Autel | EVO II Enterprise | ![]() |
![]() |
Parrot | Anafi | ![]() |
![]() |
Parrot | Anafi Thermal | ![]() |
![]() |
Parrot | Anafi USA | ![]() |
![]() |
Flights conducted with non-supported drones can still be manually entered into DroneSense Web for tracking.
Support for other drones is in development, and in some cases is dependent on software updates from the drone manufacturer. Contact your DroneSense representative if you have specific questions about drones not listed above.
Autel Smart Controller Support
With release 2022.6.1 on Android, DroneSense now supports the Autel Smart Controller. You must have Autel Explorer version 1.0.84 or later for the Smart Controller to recognize the DroneSense app.
Mobile Streaming and Tracking for Non-Supported Drones
DroneSense also supports Mobile Streaming and Tracking (MSAT) for several unsupported drones such as the BRINC Lemur with the use of additional hardware, as described in the attached setup guide. Drone telemetry is not available with this configuration, but Ops Hub viewers can see the video feed when using this feature. Click here to learn more about MSAT.