A detailed walkthrough of the redesigned DroneSense Remote flight interface introduced in the November 18, 2026 (2026.10) release, covering Video View, the Primary Flight Display, altimeter, telemetry bar, flight toolbar, in-flight side menu, marker drops, live drone telemetry, shared missions, updated platform branding, and the legacy interface option.
This guide walks through every part of the redesigned DroneSense Remote flight interface. For a quick overview, see the Remote Release Notes.
Legacy interface: You can switch back to the legacy interface in the Settings tab for the remainder of 2026. The new interface will be enforced from January 1, 2027.
Flight Screen
Launching a Flight
- Launch as before by selecting your drone, callsign, and mission. You can now also enter a mission sharing code at launch to fly in a partner agency's shared mission.
- An updated launch loading screen appears when you start a launch and stays up until a connection to the aircraft is established.
Video View
- Added a toggle at the top of the flight screen to switch between Split View (map and camera) and Video View, which fills the screen with the active camera feed.
- In Video View, a widget in the bottom right corner shows the live dock camera during launch and landing, then switches to a live 2D mini map once the drone is airborne.
- The mini map stays centered on your drone and supports zoom with the mouse wheel. It shows mission feature layers, other drones in your organization, autonomous flight routes, geofences, the operational flight area, and airspace detections.
- Collapse or expand the mini map at any time. If it is collapsed when you land, it expands automatically to show the dock camera.
Primary Flight Display
- A new Primary Flight Display bar stays visible for the entire flight and shows drone connection (RF and LTE), battery remaining, altitude, and aircraft mode (Manual or Autonomous).
- Select any item to open a side menu with more detail. Select the altitude item to change the primary altitude reference used during the flight.
Updated Altimeter
- The redesigned altimeter shows your drone's current altitude,e along with the maximum and minimum permitted flight altitudes (in blue), the autonomous flight altitude (in magenta), and the building height at the dock site, where applicable.
- Your selected altitude reference (AGL, MSL, or HAL) is shown as the main reading, and the other two are shown underneath for quick reference.
Telemetry Bar
- The redesigned telemetry bar at the bottom of the flight screen shows horizontal and vertical speed, distance from dock or controller, gimbal angle, artificial horizon with wind speed and direction, battery level and time remaining, flight duration, time to home, and flight time remaining until RTH.
- To edit the bar, hover over it and select the menu button. You can remove widgets or add widgets to suit your preference, and select Reset to default at any time to restore the original layout. More widgets are in development for future releases.
- Your telemetry bar changes are saved to your user profile, so you don't need to adjust them every time you fly.
- Hover over the bar and select the condense icon to switch to a compact view. When in condensed view, hover over a card and select the carousel icon to step through additional data.
Standard
Condensed
Flight Toolbar
- New flight toolbar with quick access to Return to Home, Calls for Service (CFS) On-Scene Status, Drop a Marker, a Widget Toggle to hide on-screen widgets so only the full video feed and primary flight display remain, Declare an Emergency, Cancel Waypoint (shown during autonomous flight, to switch to manual mode) and End Flight.
- A confirmation is shown after you select End Flight.
Hide Widgets Enabled
In-Flight Menus
In-Flight Side Menu
- The side menu now changes during flight to show the tools you need in the air: Notifications, Calls for Service (CFS), Mission Sharing Details, and Flight Details.
- In Notifications, you can silence non-critical alerts, see when new notifications arrive while the sidebar is collapsed, and clear all notifications.
- Mission Sharing Details includes QR code sharing so partner agencies can join your mission.
- The Flight Details status pill lets you see at a glance if telemetry, video, and control are fully operational. Three green indicators mean you are good to fly. The pill color updates if there are issues with telemetry, video, or control.
Flight Details
- Flight Details condenses key flight information in a side menu, including telemetry, control, and video status. Users can change their callsign, toggle flight features on or off (such as obstacle avoidance, streaming video to OpsHub and augmented reality settings), update controller settings, view dock video and stats, and switch thermal palettes in flight on compatible drones.
Markers, Drones and Missions
Marker Drop
- Select the marker icon on the flight toolbar while the crosshairs are below the horizon to drop a marker on the map at that location. The what3words address, or street address, of the marker is displayed.
- Marker Drop can also be assigned to a controller button or keyboard shortcut for quicker placement during a dynamic incident.
- The marker dropped by this function is a default pin marker added to the mission feature layer, annotated with the date and time it was dropped. After it has been dropped, you can edit the mission feature layer to update the annotation or icon.
Live Drone Telemetry
- View live telemetry and icons for drones flown by your organization, drones in a shared mission you are flying with a partner agency, and drones in your IDSB group.
Updated drone icon legend - Each drone shows its altitude in AGL and the altitude difference from your drone to support deconfliction. Drones from a shared mission or IDSB group show their organization. Organization drones show their callsign, pilot name, the mission they are flying in, and aircraft model.
- Toggle IDSB, Shared Drones in Mission, Organization Drones, and MSAT on or off from the airspace settings tab. You can also toggle on devices to see mobile assets streaming their live location into the mission.
Mission Selector and Join a Shared Mission
- When in flight, select the mission selector on the top bar to change the mission you are streaming video and telemetry to.
- Enter a Shared Mission code from a partner agency to join their shared mission and fly remote flights in that mission directly from DroneSense Remote, including if you are already airborne.
Other Updates
Weather
- Updated weather interface.
Media Manager
- Updated media manager interface with a new thumbnail view, so you can quickly find the photos and videos you need to review or share without checking through all the Calls for Service (CFS) records in your profile.
- List view remains available so you can review additional flight data alongside your media recordings.
Platform Branding
- Updated the top banner and banner icons to align with the new platform branding.
Legacy Interface
- Users can toggle back to the legacy interface in the Settings tab of DroneSense Remote for the remainder of 2026, giving agencies time to update training and records before the new interface is enforced from January 1, 2027.
- The setting is stored locally and requires a page refresh to update.
Comments
0 comments
Please sign in to leave a comment.