Z15 Spotlight Support

Complete the following steps to use the Wingsland Z15 Spotlight in DroneSense.

1. Connect the Z15 to the aircraft. On the M210 the Z15 must go in PORT II.
2. Open the DJI Pilot App.
   
3. Select Setting > RC Settings.
4. In the Cendence Button Customization section, map the Z15 to the C1 & C2 buttons on the Cendence controller.
5. Under each button menu, scroll until you see the PSDK options. We recommend setting the C1 button to control the On/Off and the C2 button to change function (twinkle, SOS, and full burn).
   

Once you have mapped the buttons to your controller. You will not have to come back into the DJI App. Simply close out the DJI Pilot app and open DroneSense.

The button mapping will remain the same on the controller regardless power cycles, battery swaps etc.