Screen sharing in OpsHub Mobile lets you stream your iOS device screen to a Mission, making it easy to share video from apps like DJI Fly. It’s available on supported devices and requires access to the feature. To get started, join a Mission, enable screen sharing, and begin broadcasting.
Screen sharing from the OpsHub Mobile app is available on supported iOS devices. It allows users to stream their screen to a Mission, making it ideal for sharing video from drone-native apps (e.g., DJI Fly) or other relevant applications.
Feature Availability
Screen sharing is a paid feature and may not be enabled on your account. Contact your Account Manager to request access or a trial.
Supported Devices
Screen sharing is currently supported on select high-performance iOS devices (see list below). High-performance devices are those with 8GB+ RAM. Devices with 6GB RAM will work but may experience limited performance.
High Performance
iPhone
- Any iPhone 18 series (expected to work based on published specs; not yet tested/validated by DroneSense)
- Any iPhone 17 series
- Any iPhone 16 series
- iPhone 15 Pro and 15 Pro Max
iPad
- iPad Air (5th generation) or newer
- iPad Pro (4th generation) or newer
- iPad mini (A17 Pro)
Limited Performance
May have limited performance, such as dropped video frames and occasional lag.
iPhone
- iPhone 15 and 15 Plus
- iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max
iPad
- iPad (11th generation)
Unsupported Devices
If your device does not meet the requirements above, the Screen Sharing toggle will appear greyed out and cannot be enabled — even if Screen Sharing is active on your account.
iPhone
- iPhone SE (any generation)
- iPhone 13 Pro and 13 Pro Max
- iPhone 13 and 13 mini
- iPhone 12 Pro and 12 Pro Max
- iPhone 12 and 12 mini
- iPhone 11
- Any earlier iPhone model
iPad
- iPad (10th generation)
- Any earlier iPad model
Instructions
If you're streaming from a DJI Avata, confirm your goggles and DJI Fly connection first — see Tips for the DJI Avata series. Otherwise, continue with the steps below.
- Install the DroneSense Ops Hub mobile app if needed.
-
Log in to the app and select a Mission.
- Tap GPS, then select Screen.
- Tap Start Broadcast and confirm. The broadcast will begin immediately after confirmation.
From this step forward, be aware that everything on your screen, including your notifications, will be shared with the mission you selected. You should enable Do Not Disturb to prevent unexpected notifications.
- Switch to the app you want to stream (e.g., DJI Fly).
- The shared screen will appear in the Mission for all viewers.
To stop streaming, return to OpsHub Mobile and toggle off screen sharing, or close the app.
Tips for the DJI Avata series
- Power on the DJI Avata, goggles, and controller before continuing.
- Connect your iOS device to the goggles using a USB-C cable.
-
Open DJI Fly and confirm the connection and video feed.
- After confirming the video feed in DJI Fly, switch to OpsHub Mobile and continue the steps above.
Troubleshooting Tips
- No Screen Sharing Option:
- Toggle is greyed out despite having Screen Sharing enabled on your account: Your device doesn't meet the minimum hardware requirements — check the Supported/Unsupported Devices lists above.
- Confirm the feature is enabled on your account.
- Broadcast Fails: Ensure screen recording permissions are enabled in iOS Settings.
- No Video: Ensure DJI Fly is active.
- Lag: Check device compatibility and network.
Comments
0 comments
Please sign in to leave a comment.