Complete the following steps to stream video and telemetry from cloud-streamed drones (Skydio, Nightingale, and Fotokite) using the OpsHub mobile app.
- Open the OpsHub mobile app and log in.
- Select the Mission you want to assign the hardware to.
- In the next screen the Assigned Hardware section will display any hardware already assigned to the mission. If you need to assign more hardware, tap Assign +.
- Select the hardware you want to add to the mission.
- Change the callsign if needed and tap Confirm.
- You should get a success confirmation after tapping Confirm, and the mission should show the hardware you selected.
Comments
0 comments
Article is closed for comments.